Stumper 220 Stump Grinder Attachment

Description

Designed to operate on mini skid-steers with a working auxiliary flow rate between 10 GPM and 15GPM @ 2800+PSI.
This 100% American made product uses a perpendicular cutting wheel that directs a majority of the cutting debris away from the operator, giving the operator a clearer field of vision.  By using the face of the wheel as its main cutting surface it enables the Stumper 220 will take up to 6 inches per-pass!  Its small compact design, weighing only 375lbs, the Stumper 220 most often can easily be transported on the same trailer your carrier is being hauled on.
The Stumper 220 uses 11 carbide tipped teeth and a patented raker design to limit the cut depth ensuring the wheel keeps rotating.  A simple cross-over one-way check value eliminates the need for case drain and keeps the wheel spinning in the proper direction. The frontal mounted cutting force regulator, eliminates the need for little movements of your desired carrier, just load the tension and allow the grinder to pull itself through the stump.
Although the majority of the cutting is done with the face of the wheel, select perimeter teeth allow for plunge cutting of surface roots.  Don't let the small size of this unit fool you, it will grind large diameter stumps, and is only restricted by where your carrier will maneuver too.  The Stumper 220 will also grind below-grade as deep as your carrier can reach.
All Stumper Industries products ship with hydraulic hoses, and 1/2 inch FF quick couplers, ready to use right off the pallet. This grinder will come with a Universal Mini-skidsteer Quick Attach.
Because this is an attachment please contact Stumper Industries for exact fitment and product requirements before you purchase, exact shipping quotes are also available with your complete address.