BOONTON 51071A 10MHz to 26.5GHz Dual Diode Power Sensor -70 to +20dBM

Description

BOONTON 51071A 10MHz to 26.5GHz Dual Diode Power Sensor -70 to +20dBM
5107xA Series of RF Sensors
The “A” series sensors were created to improve production calibration results. These sensors possess the same customer specifications as the non-A types (i.e.: 51075 and 51075A), however, the utilization of new calibration methods enhances the testing performance over previous techniques. In doing this, Boonton can provide the customer with a better product with a higher degree of confidence. The “A” series sensors utilize “Smart Shaping” technology to characterize the linearity transfer function. This is accomplished by performing a step calibration to determine the sensors response to level variations. The shaping characteristics are determined during the calibration and then the coefficients are stored in the data adapter that is supplied with the sensor. This provides improved linearity results when used with the 4230A and 5230 line of instruments with software version 5.04 (or later). Instruments that are equipped with step calibrators such as the 4530 already perform this
function when the Auto Cal process is performed. For these instruments an “A” type sensor performs the same as a non-“A” type and no discernable difference is realized.
CW and Average Power Sensors
Model
Frequency Range
Dynamic Range
Overload Rating
Maximum SWR
Impedance Connector
Pulse/Continuous
Frequency
SWR @ 0 dBm
Wide Dynamic Range Dual Diode Sensors
51071A
50 ohm K (M)
10 MHz to 26.5 GHz
-70 to +20 dBm
1 W for 1µs 300 mW
10 MHz - 2 GHz
2 GHz - 4 GHz
4 GHz - 18 GHz
18 GHz - 26.5 GHz
1.15
1.20
1.45
1.50
The item is in good condition, tested and working.